RO Installation Service
Need RO installation service for a new water purifier or re-installation after shifting?
Service Junction can help with RO fitting support, wall mounting, tap connection, inlet pipe setup, drain connection, machine placement and basic working check. Before installation, the technician checks whether the water source, power point, wall space and drain outlet are suitable for the RO system.
When You Need RO Installation Service
RO installation is required when you buy a new purifier, shift your existing machine, change the kitchen setup, move to a new house, replace an old purifier or need proper connection after renovation.
Common installation requests include:
- New RO fitting
- RO re-installation after shifting
- Wall mount setup
- Tap connection
- Inlet water pipe connection
- Drain pipe connection
- Machine placement check
- Water leakage check after fitting
- Basic purifier working check
- Old RO removal and new unit setup
Correct installation helps avoid leakage, loose pipes, low water flow and drain connection issues.
What Is Checked Before RO Installation?
Before fixing the purifier, the technician may check:
- Nearby water inlet point
- Power socket availability
- Wall strength for mounting
- Drain outlet position
- Under-sink or wall-mount space
- Pipe length requirement
- Tap connection type
- Water pressure condition
- Existing pre-filter connection, if any
- Machine accessories available in the box
If extra pipe, connector, tap, valve or pre-filter is required, the technician should explain it before installation.
RO Re-Installation After House Shifting
RO re-installation is different from new installation because the machine may already have used filters, old pipes or removed fittings.
After shifting, the technician should check:
- Whether the purifier was safely removed
- Pipe and connector condition
- Filter housing leakage
- Wall mount bracket
- Tap and drain connection
- Water flow after fitting
- Tank filling after installation
- Any damage during transport
If the purifier was unused for a long time after shifting, filter condition may also need checking.
Installation Problems That Should Be Avoided
Poor RO installation can cause repeated service issues.
Common mistakes include:
- Loose pipe connection
- Wrong drain pipe placement
- Weak wall mounting
- Pipe bending or blocking
- Tap leakage
- No proper inlet water flow
- Machine fixed too far from water source
- Power socket placed unsafely
- Purifier not checked after fitting
A proper working check after installation helps confirm water flow, leakage status and tank filling.
What You Should Keep Ready
Before booking RO installation service, keep these items ready:
- RO water purifier unit
- Power adapter
- Tap or faucet
- Pipe set
- Installation accessories from the box
- Purchase invoice, if available
- Warranty details, if applicable
- Old fittings, if this is re-installation
If any accessory is missing, share a photo before the visit so the next step can be guided.
New RO Installation vs Re-Installation
New RO installation usually includes unpacking, fixing the unit, connecting water inlet, setting the drain line and checking basic working.
Re-installation may need extra checking because the machine has already been used. Old filters, pipes, connectors or tap fittings may need replacement if damaged or blocked.
Important Warranty Note
If your RO system is newly purchased and under brand installation support, first check with the official brand customer care or authorised installation team.
Service Junction is an independent service support provider. We can help with installation, re-installation and fitting support based on service availability, but we do not claim brand-authorised installation unless valid proof is clearly shown.
Call or WhatsApp for RO Installation Service
Need RO installation service?
Call or WhatsApp Service Junction and share your RO brand, model, installation type and photos of the water point if possible. Our team will guide the next step for new installation, re-installation or fitting correction.
FAQs
What is included in RO installation service?
RO installation may include wall mounting, inlet pipe connection, tap connection, drain pipe setup and basic working check. Extra materials may be charged separately if required.
Can I book RO re-installation after shifting?
Yes. RO re-installation support can be requested after house shifting, kitchen renovation or machine relocation.
Do I need a water tap near the RO purifier?
Yes. The purifier needs a suitable water inlet point. If the tap or connector is not suitable, extra fitting may be required.
Is drain connection required for RO installation?
Yes. RO systems usually need a drain line for rejected water. Proper drain pipe placement helps avoid leakage and backflow issues.
Can RO installation be done without wall mounting?
Some models can be placed on a counter, but many RO systems are wall-mounted. The correct setup depends on machine design and available space.
What if my RO pipe or tap is missing?
If pipe, tap, connector or valve is missing, the technician can guide what material is required before completing installation.
Should I contact the brand for new RO installation?
If your RO is newly purchased and includes brand installation support, contact the official brand customer care first to avoid warranty issues.
What details should I share before booking installation?
Share your RO brand, model, whether it is new installation or re-installation, available water point, power socket position and photos of the installation area.